VORZE A10 CYCLONE SA +PLUS
A battery-powered rotating unit with a replaceable sleeve, physical buttons and Bluetooth for compatible media players. Rotation puts it in a different mechanical category from the catalogue's back-and-forth strokers.
Listed in the manufacturer's catalogueOur assessment
A relevant alternative if rotating movement and local controls are your priorities. The system has clear mechanical settings and a removable contact surface. The long stated charging time, lack of waterproofing and reliance on special sleeves are practical limitations. +PLUS is the verified model; current stock availability and delivery to Denmark have not been established.
What makes it interesting
- Seven speeds and seven rotation patterns on the device.
- Removable sleeve and separately replaceable contact parts.
- Battery operation and physical pause button.
Important caveats
- The manufacturer specifies around 5.5 hours of charging.
- The main unit is not waterproof.
- Video synchronisation requires compatible software and content.
Functions and specifications
- Technology
- Motorised rotation and Bluetooth control; no documented built-in AI
- Model ID
- JAN 4562271746699 · SA +PLUS
- Modes
- 7 speeds × 7 rotation patterns, manufacturer figures
- Runtime
- Approx. 2 hours depending on settings, manufacturer figure
- Charging
- USB-C; approx. 5.5 hours, manufacturer figure
- Weight
- 1.4 kg without sleeve, manufacturer figure
- Dimensions
- 293 × 116 × 116 mm, manufacturer figures
- Water protection
- Not waterproof
Operation and rotation patterns
The motor rotates the fitted sleeve. The exact +PLUS manual shows seven speeds and seven patterns, including direction changes and short rotation sequences. The manufacturer lists around two hours of operation and 5.5 hours of USB charging, depending on settings. This makes charging worth planning. Video synchronisation is a separate software layer; the described features do not establish built-in AI or automatic learning.
Handling and fastening
The front cover and inner holder can be removed, and the sleeve's six mounting holes must sit correctly on the holder's pins. The manufacturer specifies 1.4 kg without a sleeve. For fixed mounting, Stand Basic is available separately with desk clamps. It fits +PLUS, while the older Cyclone SA is incompatible. This difference matters when buying used hardware or additional accessories.
Pause, switching off and connection
The manual shows a physical Pause button and a power button that is held down. It also describes automatic shutdown after three minutes without input and a three-second pause if motor load is too high. The latter does not replace the user's stop control. Local speed and pattern buttons are disabled during a Bluetooth connection. We have not tested connection loss, stopping delay or protection under load.
Hygiene and replacement
According to the manual and FAQ, the main unit must not be washed with water; clean it with a dry cloth. The manufacturer's separate sleeve guide permits water cleaning of the removed sleeve but advises against turning it inside out. It must dry before being reinserted. A damaged mounting hole may make attachment inadequate, and the manufacturer advises against continuing to use such a sleeve. The electronics and contact surface thus require different care.
Software, accessories and service
The current specifications page refers to compatible 4DMEDIAPLAYER versions. The manual describes +1D/+1DVR content and an account for interactive videos; ordinary video playback alone is not enough. Use the current compatibility information instead of assuming every phone works. The manufacturer lists sleeves, mounting equipment and a support contact for missing or damaged parts. Local spare parts stock and a Danish service agreement have not been verified.
Sources and method
Sources checked 14 October 2026.